Manufactured Home Construction Process

0
1209

Construction of the home is a process involving some materials and expertise especially in sectional homes MI. It is good to understand the construction process of these manufactured homes. This will help you in budgeting your project and knowing what will be required at a particular process and time.

There is an increased interest in manufactured homes. Many people now around the US are embracing manufactured homes.

Basics of Manufactured Home Construction

Steel Chassis

This comprises double wides and single wides. They are laid on the steel chassis. Steam beams with slender twists are welded all together to make a cambered chassis.

This is prepared to aid even out or dispense the home’s weight. These curves are hardly visible but are very vital to a sturdy manufactured home that can endure vibrational powers and 55 mph transportation.

The steel chassis’ curve or camber helps the home dispense weight more efficiently and absorb shocks. American steel is known to build the best chassis. If you have a choice try not to use the Chinese ones.

Outriggers

Outriggers are elongated that may go to the actual edge of the home, sometimes they may not. Some manufactured homes are cheap and they may not have outriggers that reach the actual edge of the home.

Outriggers that reach the actual edge of the home are considered to be better since they clutch the walls’ weight better together with the roof. If the outriggers are not firm enough or they do not spread out far enough, then the home’s roof and perimeter wall can sag.

Floor Joists

After constructing chassis to specifications, the constructor will use a template or a jig to construct the floor joists. For higher quality homes, this 2×6s or sometimes 2×8s.

The cooling and heating vents, electrical cables, and plumbing lines will be fitted over the floor joists. Some designs will be fitted with electrical and ductwork over the roofs.

Next, the floor covering and subflooring will be laid.

Wall Building in Manufactured Homes

Studs, which are wood boards, are the ones used in the construction of walls. These studs are the perpendicular board. The studs are usually 2” × 4” and are spaced after every 16” in the manufactured home. Manufactured homes that are better in quality will usually have 2× 6 studs. Homes that are more affordable usually have 2×3s. How a manufactured home is constructed will be determined by wind zones and state laws.

Interior walls, which are sometimes referred to as partition walls since they do not have load-bearing qualities and also separate space can be 2×2s. They should be 24″ spaced apart.

Walls around windows and doors are constructed differently to disburse mass down the flanks of the coarse opening. Structural headers usually are used beyond the windows and doors to strengthen the area. Additionally, king studs or trimmer will be used.

Attaching Walls to trusses and Joists

The bottom platter of the inner wall is usually pinned to the floor joists. After that, the roof and the floor will snack the walls to make a mechanically sound wall. Manufactured homes have perimeter walls attached by the floor joists. Nails and metal straps are used to attach the perimeter walls to the roofs.

If a roof truss of a manufactured home sits entirely upon a top usually it indicates a mass bearing wall.

Well, constructing a manufactured home or mobile home is a process that requires a lot of input. If you want a quality sectional homes MI manufactured home then you must be willing to go for the quality materials as well. Manufactured homes require some experts who know and understand their work well. Now it is up to you to choose the home of your choice.

Comments are closed.