Why you need a Berkey Pro Care maintenance kit


Cleaning your berkey water filter is important because it ensures that it will continue to perform at its best. You will also reduce the chance of any hard to remove particles from building up in the filter that could eventually clog it.  The easiest way to clean your berkey filter is with the Berkey pro care maintenance kit from USA berkey filters.

Cleaning your berkey water filter regularly is a simple job, but one that needs to be done in order to ensure that you get the best tasting water every time.

Step 1 – Take the first step by removing the sediment canister from the top of your unit. This is located on the top of the unit and you must turn off your unit first before unscrewing it. This can be easily removed by hand and should come off with little effort.

Step 2 – Next, you need to remove any gunk or sediment from the bottom and around the hole of this sediment canister. To do this, you need to run a cleaning brush around these parts until they are clean. Remember that if you use this method on a regular basis, then all you should need to do is scrub around inside once or twice a month to maintain this system. If you have not cleaned this sediment canister regularly then you may find that there is quite a bit more gunk or debris inside which will make it harder for you to clean.

Cleaning your Berkey Water Filter is important for a number of reasons. As the water sits in the Black Berkey element, it begins to develop a film. Over time, this film will begin to turn black and give your water an unpleasant taste. Cleaning your Black Berkey Water Filter regularly (every 3-6 months) will ensure that you get the most out of our filters and keep your water tasting great!

All you need to do is fill up a bucket with warm water and add 1/4 cup of salt. Add the first filter into the bucket with the outlet facing down. Swirl it around to remove any particles that may be on the outside of the filter. Now place each pipe cleaner into your pipe cleaner holder (on top of the filter). The pipe cleaners should be able to reach all areas of the filter by being placed at different angles. Allow the water to run through while still in the bucket until you notice that no more dirt has settled at the bottom of your bucket. The time this takes depends on how dirty your filter is; however, every 2 minutes, check on your pipe cleaners to see if they are black yet. If so, replace them with new ones and reinsert them into their holders.

Every time you use your Berkey water filter, there are things that stick to the Black Berkey element. These are simple things like mineral deposits and small amounts of lead. Over time, these build-ups can affect the performance of your filter. If you don’t clean it regularly, the performance will decrease and you will have to replace it more frequently.

The first thing that you need to do when cleaning your filter is to turn off the water flow. This will prevent any type of water from entering or exiting the chamber. You also want to make sure that the Black Berkey element is removed from the chamber as well. This makes it easier for you to clean it and also prevents any type of damage from occurring as well.

If you want you can use a sponge with warm soapy water in order to wipe down the inner side of the chamber, but this isn’t necessary and should only be used if you are trying to remove some sort of stain or discoloration that may be present on the inner surface. If this is not needed, then it is recommended that you instead use a damp cloth that has been mixed with baking soda or a vinegar solution in order to remove buildup inside of your chamber.

Once this has been completed, you can then take

Comments are closed.