What Is The Best Installation Process For Roof Shingles?

0
551

Introduction

Have you ever wondered what the best installation process for roof shingles is?  Many homeowners wonder this as they walk into their local hardware store and browse the many options to choose from. Like anything, there is more than one way to install roof shingles on your home. Let’s take a look at what each method is so you can make an educated decision for yourself. This resource may be of interest to you. This article will provide 4 quick tips on how to properly install roof shingles.  These tips and tricks will help you find the perfect solution for your home. Let’s get started!

Underlayment

The first step is to purchase materials such as shingles, metal flashing, underlayment and nails-which can be found at your local hardware store or lumberyard. It’s important that you do not underestimate this step because these supplies are essential for a proper installation process.

Measure and Cut

Next, measure and cut the underlayment so it’s a few inches wider than the roofline and long enough to wrap around the edges of your roof by at least six inches. Using a utility knife makes cutting easier in both straight and curved areas. Afterward, staple down with a hammer stapler to ensure that there won’t be any leaks later on.

Metal Flashing

Flashing is used to divert water away from your house and into the gutter so that it does not leak through. It’s important that you measure your metal flashing using a tape measure and mark where you’re going to cut with a pen or marker. Afterward, use tin snips along with an adjustable wrench in order to cut the metal flashing properly-and then fasten it down with nails on all four sides of the shingled roofline.

Take Measurements

Lastly, take measurements so you know where to nail in the metal flashing and lay the shingles in place on top of that! This will help ensure there aren’t any mistakes when installing roof shingles everyone knows how costly those can be.

Conclusion

To summarize, this article providing four tips on how to properly install roof shingles: measure and cut the underlayment; fasten the metal flashing down with nails; take measurements after measuring and marking where to cut with a pen or marker; and laying the shingles down on top of metal flashing.  These tips and tricks will help you find the perfect solution for your home. If this article has been helpful in any way, please feel free to share it with those who may also find it useful! Thank you for reading, don’t forget to subscribe below!

Comments are closed.