How to Upgrade and Install Desktop or Laptop Memory

Your computer stores active data in RAM. Depending on other conditions, more Memory may help your computer multitask. If you know what RAM to buy then replacing or changing RAM on a pc or laptop is one of the simplest modifications. Also see how upgrading ram is plug and play

Important things to know:

• Understand your device’s RAM type and capacity.
• Before starting, turn off your computer and disconnect the cord.
• Place the freshly installed Memory carefully after removing the old RAM.

part-1 buying RAM

1. Verify how much RAM your computer has:

Know how much memory your machine has before buying more. Irrespective of os, you can simply check how much RAM your pc has.

2. Verify your PC and OS’s Memory capacity.

OS and hardware constraints determine how much Memory your machine can handle.

tip: If your PC handles 128 GB, your motherboards may not. Examine your motherboard’s manual or perform an online system analyzer to find out how much RAM it supports.

3. Verify your motherboard RAM format.

DDR4 RAM is typical now, however, older computers may require DDR3, DDR2, or even DDR. If so, you may wish to upgrade the computer as older Memory is becoming more costly.

4. Calculate clock speed.

RAM speeds vary so If numerous speeds are enabled, your machine will function at the lowest speed. Even increasing Memory might hinder performance.

5. Buy RAM modules in pairs. Almost all RAM modules should be put in pairs.

Each module’s overall value should be within the restrictions of your motherboard.

Tips: RAM is sometimes sold in pairs to make buying simpler.

Several computers can function with just one Memory module.

6. Understand laptop and desktop memory.

Most laptops utilize smaller SO-DIMM Memory, whereas desktops use DIMM.

part-2 Installing Desktop RAM

1. Shut down the entire system.

2. Open the case remember that Older cases need a Phillips head screwdriver to open, while others include thumbscrews and Disconnect the motherboard panel.

tip: Dust your computer while it’s open.

3. Working inside a computer may cause electrostatic discharges that harm components. Using an anti-static wrist strap or grounding before working reduces this danger.
4. Uninstall RAM (if necessary). When changing Memory, push the latches on either end to remove the old modules.
5. Inspect the RAM slot layout.
6. Put each module straight into the slot, aligning the bottom notches. Apply equal pressure to the module’s top until the latches snap into place.
7. Close your computer after installing Memory.
8. Boot your machine into your operating system.
9. Check RAM recognition. Check your computer’s system information regarding RAM installation and usage.

part-3  Laptop RAM install

1. Switch off your laptop. Remove the battery to avoid harm (if possible).

2. Flip the laptop to reach the bottom.
3. Working inside a computer may cause electrostatic discharges that harm components. Using an anti-static wriststrap or grounding before working reduces this danger.
4. Most laptops feature one or two memory slots. Upgrades may need older RAM removal.
5. Add Memory. Insert at 45 degrees and press down to secure.

Close RAM. Close look after installing Memory.

8. Check RAM recognition. Check your computer’s system information regarding RAM installation and usage.