3 Things You Can Do Tell If You Have A Problematic Pressure Tank

Almost every well-water system depends on a pressure tank. The tank may seem simple, but it remains vital–from its storage capacity up to its functions, the pressure tank needs to be constantly maintained and looked after with care.

At some point, every pressure tank will be needed to replace, even if you lessen the cycle while balancing the pressure. While there are ways to extend its life cycle, it will come to a point where it will become unbearable. Here are ways you can do to determine to see if your pressure tank is in need of replacement:

Inspect for leaks

Pressure tanks are prone to leakage. However, it often happens when the tank unit is defective, corroded, bearing too much water pressure, or worn out anode rod. High humidity can make leaks completely difficult to spot, so consider checking for any rusts or the base floor around the tank. If your pressure tank is indeed leaking, regardless of its cause, consider calling for repair or if it’s decade-old, have it replaced with a new unit.

See the amounts of sand in the tank

Before you decide to look into the tank, have the well-pump turned off and open the drain valve. If you spot a large amount of sand in the unit, it only indicates the intake screen has already failed and would need replacement soon. Every air pressure tank pump can be prone to damage caused by unfiltered sand.

Check for bladder rupture

Bladder rupture is another tell-tale sign that your pressure tank is old or the pressure switch is failing and would need replacement as well. Failing to replace the unit or the faulty pressure control would cause damage to the well pump. Be sure to check the gauge to see for any pressure bouncing, and if it happens, you likely have a problematic tank to replace.

For precision dispensing systems and industry-grade pressure tank units, visit Unicontrols.